John Deere Products & Services D100 User Manual download pdf (Page 40)

CAUTION: Mower lift arms can pinch ngers. Lift arms are

spring loaded and can snap back when deck is removed.

Lock lift lever before pulling pin to remove mower deck.

GXAL42026—UN—04MAR13

5. Remove spring locking pins and washers (F) and disconnect rear

draft arm (G) and adjustable lift links (H) on each side.

GXAL42027—UN—04MAR13

107 cm (42 in.) mower deck shown

6. Remove spring locking pin (I) and washer and front draft rod (J) from

mower deck bracket (K).

7. Remove mower drive belt from drive sheave (L).

8. Remove wood blocks from both sides and slide mower deck out from

under the machine.

9. When operating the machine without the mower deck:

• Remove front draft rod from machine and attach it to the mower

deck.

GXAL42028—UN—05MAR13

107 cm (42. in.) mower deck shown

• On 107 cm (42 in.) mower deck only: Push mower engagement

drive cable into clip (M) and hook end of cable spring with

hardware (N) into peg on left side of machine frame.

Installing Mower Deck

1. Park machine safely. (See Parking Safely in SAFETY section.)

2. Put attachment lift lever in the transport position.

3. Slide mower under machine.

4. Put wood blocks under each side of mower deck.

5. Put attachment lift lever in lowest position.

GXAL42029—UN—04MAR13

6. Fasten rear draft arm (A) and adjustable lift link (B), on each side,

with washers and spring locking pins (C).

Service Mower

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

No comments

John Deere Products & Services D100 User Manual Page 40